Stirrer Accessories
HEPATOCHEM 8 X 4 ml vials photochemistry holder for PhotoRedOx Box, Duo, and TC
8 X 4 ml vials photochemistry holder for PhotoRedOx Box™ Single HCK1006-01-016, PhotoRedOx Box™ Duo HCK1006-01-023, and PhotoRedOx Box™ TC HCK1006-01-025
Chemglass Life Sciences Stirring Shaft, PTFE Covered SS, 525mm OAL, 66mm OD Retreating Blade, Fits Reactors up to 1000mL
Stirring Shaft, PTFE Covered SS, 525mm OAL, 66mm OD Retreating Blade, Fits Reactors up to 1000mL
Chemglass Life Sciences 6mm Stirrer Bearing, 14/20
6mm Stirrer Bearing, 14/20. Replacement part for CG206001 Micro Stirrer Assembly.
Chemglass Life Sciences Agitator, PTFE, Four Blade, 6in Diameter, Fits 25.4mm Shaft Size, 60° Impeller Angle
Agitator, PTFE, Four Blade, 6in Diameter, Fits 25.4mm Shaft Size, 60¿ Impeller Angle. Agitators are made entirely of PTFE and glass filled PTFE and are for use with 25.4mm OD stirrer shaft CG-2097 and have 60¿ impeller angles. The 60¿ impellers are set up to stir downwards in a clockwise direction and upwards when rotated counter-clockwise. Agitator hub is open so that it can be positioned anywhere along the shaft. Locks onto shaft with a collet hub and nut and has a glass filled PTFE safety screw. PLEASE NOTE: ANGLED IMPELLARS DESIGNED TO STIR UPWARDS IN A CLOCKWISE DIRECTION ARE AVAILABLE. PLEASE CALL FOR PRICING.
Chemglass Life Sciences Stirrer Blade, PTFE, Banana Shape, Perforated, 10mm, for 20000mL Flasks, 55/50 minimum joint clearance
Stirrer Blade, PTFE, Banana Shape, Perforated, 10mm, for 22000mL Flasks, 55/50 minimum joint clearance. Blade is shaped to resemble the contour of a round bottom flask. Blades are perforated. Made of 1/8" PTFE to fit 10mm OD stirrer shafts. Minimum joint size listed is the size required to allow passage of the blade.
Chemglass Life Sciences Agitator, PTFE, High Viscosity, 5.5in Diameter, Fits 19mm Shaft Size, Fits 2L-5L Reactors
Agitator, PTFE, High Viscosity, 5.5in Diameter, Fits 19mm Shaft Size, Fits 4L-5L Reactors. High viscosity agitator, made entirely of PTFE and glass filled PTFE, provides excellent stirring at the bottom of 4L through 5L reactors, especially when heavy slurries are being mixed. Agitator attaches to stir shaft by both a compression fitting and a glass filled PTFE safety pin. Heavy duty blades are 7mm thick. Supplied complete with one glass filled PTFE safety pin.
Chemglass Life Sciences Stirring Shaft, 19mm, Button Style, for 12000 to 20000mL Flasks, 725mm OAL
Stirring Shaft, 19mm, Button Style, for 12000ml. to 22000ml. Flasks, 725mm OAL. A 19mm OD precision ground stirrer shaft to fit CG-2082 and CG-2083 19mm bearings. Side button for attachment of CG-2089 PTFE stirrer blades.PLEASE NOTE: THESE SHAFTS ARE NOT TO BE USED WITH ANY TYPE OF PTFE BEARING. FOR POLISHED SHAFTS USED WITH PTFE BEARINGS SEE CG-2088. ALSO NOTE: 19MM SHAFTS HAVE A REDUCED DIAMETER TOP SECTION THAT IS 1/2"OD, PLEASE KEEP THIS IN MIND WHEN SELECTING THE PROPER SIZE COUPLING.
Chemglass Life Sciences Agitator, PTFE, 10mm, Four Blade, 120mm Dia, Fits Shaft Size 10mm, 45° Impeller Angle
Agitator, PTFE, 10mm, Four Blade, 120mm Dia, Fits Shaft Size 10mm, 45¿ Impeller Angle. Agitators are made entirely of PTFE and glass filled PTFE and are for use with 10mm OD stirrer shaft CG-2075-B. Available in 45¿, 60¿ and 90¿ impeller angles. The 45¿ and 60¿ impellers are set up to stir downwards in a clockwise direction and upwards when rotated counter-clockwise. Agitator hub is open so that it can be positioned anywhere along the stirrer shaft and locks onto shaft with a glass filled TFE screw.
Chemglass Life Sciences Stirring Shaft, 19mm, Polished, Button Style, for 12000 to 20000mL Flasks, 725mm OAL
Stirring Shaft, 19mm, Polished, Button Style, for 12000mL to 22000mL Flasks, 725mm OAL. A 19mm precision ground and polished stirrer shaft to fit CG-2086 19mm PTFE bearings. Side button for attachment of CG-2089 PTFE stirrer blades.PLEASE NOTE: THESE SHAFTS ARE NOT TO BE USED WITH ANY TYPE OF GLASS BEARING. FOR GROUND SHAFTS USED WITH GLASS BEARINGS SEE CG-2085.ALSO NOTE: 19MM SHAFTS HAVE A REDUCED DIAMETER TOP SECTION THAT IS 1/2"OD, PLEASE KEEP THIS IN MIND WHEN SELECTING THE PROPER SIZE COUPLING.
Chemglass Life Sciences 10mm Chem-Vac Stirrer Bearing, PTFE, 29/42 Joint Size
10mm Chem-Vac Stirrer Bearing, PTFE, 29/42 Joint Size. Chem-Vac PTFE stirrer bearing provides a VACUUM TIGHT FLAKE-FREE SEAL. Two versions of the bearing are available, the standard series for 2L and smaller vessel capacities and the stabilizer series that incorporates a PEEK/PTFE stabilizing bushing that is molded to the lower portion of the inner joint. The stabilizer greatly reduces stirrer shaft whip on larger vessels. The bearing consists of a PTFE standard taper body, Glass filled polypropylene screw cap, PEEK Compression spring, PEEK/PTFE sleeve and a glass filled polypropylene loosening nut. The polymer blend sleeve provides a long lasting seal for use up to 500 RPM. Loosening nut above the standard taper inner joint allows easy and quick removal. PLEASE NOTE: PTFE STIRRER SHAFTS ARE NOT RECOMMENDED FOR USE WITH THIS BEARING.
Chemglass Life Sciences 10mm Stirring Shaft, Chem-Stir, Polished, For Use With 1000mL-4L Flasks, 480mm OAL, Complete with PTFE Nut and Bolt
10mm Stirring Shaft, Chem-Stir, Polished, For Use With 1000mL-4L Flasks, 480mm OAL, Complete with PTFE Nut and Bolt. A 10mm OD precision ground and polished stirrer shaft with our patented** Chem-Stir blade attachment system. Shaft (C) has been manufactured with a ring at the lower end to permit attachment of the blade (B) with a PTFE nut (D) and bolt (A). Shaft is supplied complete with PTFE nut and bolt set. For use with PTFE bearings such as the CG-2077. Polished shaft will not cause abrasion to the sealing surfaces of the PTFE bearing, thereby allowing a vacuum tight seal. Uses the same PTFE nut and bolt blade attachment method as the CG-2074 ground shaft. PLEASE NOTE: STIRRER BLADES MUST BE PURCHASED SEPARATELY.THESE SHAFTS ARE NOT TO BE USED WITH ANY TYPE OF GLASS BEARING. FOR GROUND SHAFTS USED WITH GLASS BEARINGS SEE CG-2074.
Chemglass Life Sciences Stirrer Bearing, Macro, Glass, with tooled Lubricant Cup, for 10mm Shaft, 45/50 Inner Joint
Stirrer Bearing, Macro, Glass, with tooled Lubricant Cup, for 10mm Shaft, 45/50 Inner Joint. Similar to CG-2070 but with a tooled lubricant cup at the top of the bearing to hold an increased amount of lubricant. NOTE: Not for use with CG-2078 or CG-2079 polished stirrer shafts.
Chemglass Life Sciences 10mm OD x 440mm Stirrer Shaft
10mm OD x 440mm Stirrer Shaft. Replacement part for CG206401 Semi-Micro Stirrer Assembly.
Chemglass Life Sciences Stirrer Blade, PTFE, 19mm, Heavy Duty, for 50000mL Flasks, 44mm Width x 175mm Length, 55/50 minimum joint clearance
Stirrer Blade, PTFE, 19mm, Heavy Duty, for 50000mL Flasks, 44mm Width x 175mm Length, 55/50 minimum joint clearance. Stirrer blade made of 3/16" thick solid PTFE for use with both Chem-Stir™ and button style stirring shafts having a 19mm OD.
Chemglass Life Sciences PTFE Washer Set Only
PTFE Washer Set Only. Replacement part for CG208601 stirrer bearing.